| Test Type | Test Item | Target | Reference |
Electrical
Characteristics | Differential Mode RL(SDDII) | 0.01<f<4.1 ; < -12+2*SQRT(f )
4. 1<f<11. 1 ; <-6.3+13*log10(f/5.5)
Where f is in GHz
Measurements units: dB | SFF 8431 |
Common mode return loss
(SCCII) | 0.01<f<2.5 ; <-7+1.6(f )
2.5<f<11.1 ; <-3
Where f is in GHz
Measurements units: dB | SFF 8431 |
| NEXT | <-26dB from 1MHz to 11GHz | / |
| Cable assembly Impedence | 100+/ -100hm
Rise time of 30 ps (20 %- 80 %) | (20%~80 %) |
| Insertion Loss Deviation | -1dB≤ILD≤1dB
300KHz≤f≤6GHz | / |
Environmental
Characteristics | Operating Temperature | -40~85°C | Cable operating temp.range |
| Thermal Shock | Electrical performance meet the
specification requirement | EIA-364-32D. Method A.
TC-1. -55 10 85C,100
cycles, 15 min, dwells |
| Cyclic Temp. & Humidity | Electrical performance meet the
specification requirement | EIA-364-31 Method III,Test
Cond A |
| Salt spray | 48 hours salt spraying after shell
corrosive area less than 5% | EIA-364-26 |
| Temperature Life | Performance meets the specification requirement | EIA-364-17B w/ RH, Damp
heat 85C at 85% RH for 500 hours |
Mechanical
Characteristics | MechanicaI Vibration | Performance meets the specification requirement | EIA-364-28E.11 TC-VII, Test Cond. D 15minutes in X,Y,Z axis. |
| Cable Plug Retention in Cage | 90N Min. | No functional damage to cable plug below 90N. Per SFF-8432 Rev 5.0 EIA-455-6B |
| Cable Retention in Plug | 90N Min. | Clamp and Shock per EIA-364-27B, TC-G, 3times in 6directions, 100g, 6ms |
| Mechanical Shock | Performance meets the specification requirement | SFF-8432 Rev 5.0 |
| Cable plug Insertion | 18N(Max.) | SFF-8432 Rev 5.0 |
| Cable plug extraction | 12.5N(Max.) | EIA-364-09; perform plug cycles Plug and Receptacle mate rate: |
| Durability | 50 Time. No evidence of physical damage | 250times/hour |
