Home > Copper Module >

High Quality 10G-T Copper RJ45 Module 30m Distance 10Gbps UTP Network Cable Module

Product Categories

Shenzhen Nufiber Systems Technology Co., Ltd.

Contact Now

High Quality 10G-T Copper RJ45 Module 30m Distance 10Gbps UTP Network Cable Module

Name: High Quality 10GT Copper RJ45 Module 30m Distance 10Gbps UTP Network Cable Module
Brand: NUFIBER
Price: 1 USD

Quality High Quality 10G-T Copper RJ45 Module 30m Distance 10Gbps UTP Network Cable Module for sale

Brand Name : NUFIBER

Model Number : SFP-10G-T

Certification : CE FCC Rohs

Place of Origin : China

MOQ : 1 piece

Payment Terms : L/C, T/T, Western Union,Credit Card

Supply Ability : 10,000 pcs per month

Delivery Time : Within 1-3 work days

Packaging Details : 10pcs/plastic bag, 500pcs/carton

Data Rate : 10Gb/s

Distance : 30m

Connector : RJ45

DDM : Support

Power Supply : 3.3V

Working Temperature : 0~70℃

Warranty : 1 years

Compatibility : Cisco, HP, Huawei, Finisar...

Manufacturer : Yes

Contact Now

High Quality 10G-T Copper RJ45 Module 30m Distance 10Gbps UTP Network Cable Module

Description

SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP's RX_LOS pin for link indication. If pull up SFP's TX_DISABLE pin, PHY IC be reset.

Cable Length

Standard	Cable	Reach	Host Port
10Gbase-T	CAT6A	30m	XFI
5Gbase-T/2.5Gbase-t	CAT5E	50m	5GBase-R/2.5GBase-X
1000base-T	CAT5E	100m	1000base-FX

Optical Parameters

Parameter	Symbol	Min.	Typical	Max.	Units	Notes/Conditions
Supply Current	Is		320	375	mA	1.2W max power over full range of voltage and temperature. See caution note below
Input Voltage	Vcc	3.13	3.3	3.47	V	Referenced to GND
Surge Current	Isurge		30		mA	Hot plug above steady state current. See caution note

Low-Speed Signals

Low-Speed Signals, Electronic Characteristics
Parameter	Symbol	Min	Max	unit	Notes/Conditions
SFP Output LOW	VOL	0	0.5	V	4.7k to 10k pull-up to host_Vcc, measured at host side of connector
SFP Output HIGH	VOH	host_Vcc -0.5	host_Vcc + 0.3	V	4.7k to 10k pull-up to host_Vcc, measured at host side of connector
SFP Input LOW	VIL	0	0.8	V	4.7k to 10k pull-up to Vcc, measured at SFP side of connector
SFP Input HIGH	VIH	2	Vcc + 0.3	V	4.7k to 10k pull-up to Vcc, measured at SFP side of connector

High-Speed Electrical Interface

High-Speed Electrical Interface Transmission Line-SFP
Parameter	Symbol	Min	Typ	Max	unit	Notes/Conditions
Line Frequency	fL		125		MHz	5-level encoding, per IEEE 802.3
Tx Output Impedance	Zout,TX		100		Ohm	Differential, for all frequencies between 1MHz and 125MHz
Rx Input Impedance	Zin,RX		100		Ohm	Differential, for all frequencies between 1MHz and 125MHz

High-Speed Electrical Interface, Host-SFP
Parameter	Symbol	Min	Typ	Max	unit	Notes/Conditions
Single ended data input swing	Vinsing	250		1200	mV	Single ended
Single ended data output swing	Voutsing	350		800	mV	Single ended
Rise/Fall Time	Tr,Tf		175		psec	20%-80%
Tx Input Impedance	Zin		50		Ohm	Single ended
Rx Output Impedance	Zout		50		Ohm	Single ended

Products Show
High Quality 10G-T Copper RJ45 Module 30m Distance 10Gbps UTP Network Cable Module

Packaging & Shipping

High Quality 10G-T Copper RJ45 Module 30m Distance 10Gbps UTP Network Cable Module

Factory Show

High Quality 10G-T Copper RJ45 Module 30m Distance 10Gbps UTP Network Cable Module Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Nufiber Systems Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!